LINKS
LINKS
How to change Power-saving mode and Normal mode for the legacy OEM engine
Announcer: Stephen Time: 30th Jul 2021
Share to :

Power-saving mode will turn off USB communication on chip+ MCU production

If the chip+MCU production can transport the data via series port but can not transport the data via USB mode. This may be caused by enabling the power saving mode. Because the power saving mode will close the USB communication to save the power. Take EM3296 for example, EM3296 can scan below barcode to enable power saving function, at the same time USB mode will be closed.

http://res.newland-id.com/misc/images/Power_saving_mode_USB/2.png


 

 

You can scan below barcode to close the power saving function:

http://res.newland-id.com/misc/images/Power_saving_mode_USB/1.png

 

All comments (0)