LINKS
LINKS
How to send command through serial port to keep illumination always on for EM3085-C
Announcer: Stephen Time: 30th Jul 2021
Share to :
MORE
953 views 0 comments

How to send command through serial port to keep illumination always on

 

Example:

W0C000C

 

00 is register address

 

 

1.     Read Registers [read present configuration from register 0x0000]

a)     Commend Sent

7E 00 07 01 00 00 01 00 00

 

b)     Message Received [the present state of register 0x0000 is 1101 0111(HEX D7)]

02    00 00 01 D7 3A D2

 

2.     Write Registers [set register 0x0000 Bit 3-2 as "11", I.E. 1101 1111(HEX DF)]

a)     Command Sent

7E 00 08 01 00 00 DF 00 00

 

b)     Message Received

       02 00 00 01 00 33 31

 

3.     Save register data in EEPROM

 

a)     Command Sent

0x7E 0x00 0x09 0x01 0x00 0x00 0x00 0xDE 0xC8

b)     Message Received

    0x02 0x00 0x00 0x01 0x00 0x33 0x31

 

Scanning a programming barcode can change register value and save register data in EEPROM as well. As for command programming, it requires a write command and a save command to perform these two tasks. To save register data in an external EEPROM, users need to send the save command to the engine.

All comments (0)
POPULAR TAGS