The decoder board and the imager can be separately mounted, which provides flexibility for integration and suits devices with small space inside.
The advanced latest technology incorporated in the scan engine promises low power consumption and prolonged service life.
The NLS-EM2096 supports USB and TTL-232 interfaces to meet diverse customer needs.
The NLS-EM2096 excels at reading on-screen barcodes even when the screen is covered with protective film or set to its lowest brightness level.
Armed with Newland’s sixth-generation of UIMG® technology, the scan engine can decode even poor quality barcodes with ease. The slim footprint makes this scan engine easier to fit into today’s and tomorrow’s super-thin devices.
Performance | Image Sensor | 640×480 CMOS | |
| Illumination | Red LED 625±10 nm | ||
| Symbologies | 2D:PDF417, QR Code (QR1/2, Micro), Data Matrix (ECC200, ECC000, 050, 080, 100, 140), Chinese Sensible Code 1D:Code 128, UCC/EAN-128, AIM-128, EAN-8, EAN-13, ISBN/ISSN, UPC-E, UPC-A, Interleaved 2 of 5, ITF-6, ITF-4, Matrix 2 of 5, Industrial 25, Standard 25, Code 39, Codabar, Code 93, Code 11, Plessey, MSI-Plessey, GS1-DataBarTM (RSS), (RSS-14, RSS-Limited, RSS-Expand) |
||
| Resolution | ≥3mil | ||
| Typical Depth of Field | EAN-13 Code 39 PDF 417 Data Matrix QR Code |
70mm-340mm (13mil) 40mm-155mm (5mil) 45mm-105mm (6.67mil) 40mm-105mm (10mil) 45mm-145mm (15mil) |
|
| Scan Angle | Roll: 360°, Pitch: ±45°, Skew: ±50° | ||
| Min. Symbol Contrast | 20% | ||
| Field of View | Horizontal 44°, Vertical 33.2° |
Physical | Dimensions (L×W×H) | Imager Decoder Board |
21.5(D)×9.8(W)×8.5(H)mm (max.) 21.3(D)×21.3(W)×4.1(H)mm (max.) |
| Weight | 4g | ||
| Operating Voltage | 3.3VDC ±5% | ||
| Rated Power Consumption | 608mW (typical) | ||
| Current@5VDC | Operating Idle Sleep |
190mA (typical), 227mA (max.) 10mA <10uA |
|
| Interfaces | TTL-232, USB (HID-KBW, COM Port Emulation, HID-POS) |
Environmental | Operating Temperature | -20℃ to 50℃ (-4°F to 122°F) | |
| Storage Temperature | -40℃ to 70℃ (-40°F~158°F) | ||
| Humidity | 5% to 95% (non-condensing) | ||
| Ambient Light | 0~100,000lux (natural light) |
Accessories | NLS-EVK | Software development board equipped with a trigger button, beeper and RS-232 & USB interfaces. | |
| Cable | USB RS-232 |
Used to connect the NLS-EVK to a host device. | |
| Power Adapter | DC5V power adapter to power the NLS-EVK with RS-232 cable. |
Certifications |
| Image Sensor | |
|---|---|
| 640×480 CMOS | |
| Illumination | |
|---|---|
| Red LED 625±10 nm | |
| Symbologies | |
|---|---|
| 2D:PDF417, QR Code (QR1/2, Micro), Data Matrix (ECC200, ECC000, 050, 080, 100, 140), Chinese Sensible Code 1D:Code 128, UCC/EAN-128, AIM-128, EAN-8, EAN-13, ISBN/ISSN, UPC-E, UPC-A, Interleaved 2 of 5, ITF-6, ITF-4, Matrix 2 of 5, Industrial 25, Standard 25, Code 39, Codabar, Code 93, Code 11, Plessey, MSI-Plessey, GS1-DataBarTM (RSS), (RSS-14, RSS-Limited, RSS-Expand) |
|
| Resolution | |
|---|---|
| ≥3mil | |
| Typical Depth of Field | |
|---|---|
| EAN-13 Code 39 PDF 417 Data Matrix QR Code |
70mm-340mm (13mil) 40mm-155mm (5mil) 45mm-105mm (6.67mil) 40mm-105mm (10mil) 45mm-145mm (15mil) |
| Scan Angle | |
|---|---|
| Roll: 360°, Pitch: ±45°, Skew: ±50° | |
| Min. Symbol Contrast | |
|---|---|
| 20% | |
| Field of View | |
|---|---|
| Horizontal 44°, Vertical 33.2° | |
| Dimensions (L×W×H) | |
|---|---|
| Imager Decoder Board |
21.5(D)×9.8(W)×8.5(H)mm (max.) 21.3(D)×21.3(W)×4.1(H)mm (max.) |
| Weight | |
|---|---|
| 4g | |
| Operating Voltage | |
|---|---|
| 3.3VDC ±5% | |
| Rated Power Consumption | |
|---|---|
| 608mW (typical) | |
| Current@5VDC | |
|---|---|
| Operating Idle Sleep |
190mA (typical), 227mA (max.) 10mA <10uA |
| Interfaces | |
|---|---|
| TTL-232, USB (HID-KBW, COM Port Emulation, HID-POS) | |
| Operating Temperature | |
|---|---|
| -20℃ to 50℃ (-4°F to 122°F) | |
| Storage Temperature | |
|---|---|
| -40℃ to 70℃ (-40°F~158°F) | |
| Humidity | |
|---|---|
| 5% to 95% (non-condensing) | |
| Ambient Light | |
|---|---|
| 0~100,000lux (natural light) | |
| NLS-EVK | |
|---|---|
| Software development board equipped with a trigger button, beeper and RS-232 & USB interfaces. | |
| Cable | |
|---|---|
| USB RS-232 |
Used to connect the NLS-EVK to a host device. |
| Power Adapter | |
|---|---|
| DC5V power adapter to power the NLS-EVK with RS-232 cable. | |
