Preparation:

1.       Download the following driver and Easyconnect:

UFCOM, USB CDC driver

https://ccloud.ndevor.biz/s/tXdjQfgwTgPzxoF

EasyConnect_1.0.5, software tool pairing BT scanner with USB dongle

https://ccloud.ndevor.biz/s/P7wERJ4kRbqec4D

2.       Windows OS based computer (host device)

Pair BT scanner with USB Dongle

1.       Confirm the dongle type, scan the following barcode to make sure the BT scanner is under dongle mode:

For New Dongle, set up work as BT serial com port:

For Old Dongle, set up work in 2.4G mode

2.       Connect the USB Dongle with PC, Open EasyConnect.exe.

3.       Scan barcode presented from EasyConnect

4.       it will take around 5~6 seconds to complete pairing between scanner dongle and scanner which give a beep when it’s done, green LED on dongle BP101C indicating connection is created with scanner. Blue LED on scanner keep on during BT connection

Scan the following barcode to restore the factory default if you need: