LINKS
LINKS
How to connect to Newland products in linux system
Announcer: Kason Time: 3rd May 2023
Share to :
2262 views 0 comments

Chip provide cdc_amc driver,default is /ttyACM0

  1. Product chip device access on LINUX system
  2. Use command lsmod,Check if there cdc acm driver module, if the system already exists in the drive,
  3. As  below:
  4. Use command lsusb,Inquire USB device ,Corresponding display device VID and PID,
  5. Use su Command to switch to ROOT permissions
  6. Query device mapping out of the port number /dev/ttyACM0
  7. Use the cat command to test reading
All comments (0)
POPULAR TAGS