1、Use network communication (Connect the network cable)
    1）Select the network device on the left
    2）Network Setup -> Select “DHCP”
    3）Remember “Locale IP Address”

2、Storage path setting
    1） Settings -> FTP Settings
    2）Path: Select the storage path for the images

3、Image Save
    1）Advance Setup -> Image Save
    2）Image Read Successfully -> Select ”Ftp”
    3）Fail to read image -> Select ”Ftp”
    4）Ftp Address: Enter “Locale IP Address”

4、Read Barcode
    1）Quick Setup -> “Start Trigger”
    2）Read Barcode
    3）Quick Setup -> “Stop Trigger”

5、Check the Images
    1）Open the storage path to check the images